Will my PPF look perfect? PPF installation is very difficult, time consuming, very intricate, and costly. The material isn't cheap and if there is dirt, hair or silvering (film that is stretched too much) means that piece has to be replaced. Bubbles, lift lines, and water under the film are common occurrences with every install. Lift lines are where a section has been laid then has to be lifted to remove an air bubble or speck of dirt. Air bubbles will evaporate over several days (or weeks, depending on weather) when the film is exposed to heat. If air bubbles are still on the film, the only way to remove it is to suck the air out with a needle. Expect these things to happen right after a PPF installation. Most reputable installers will strive for perfection. Unless PPF is installed in an enclosed room with "space-age" filtration system and not a speck of dust, there will be some degree of dust contamination. Pre-existing flaws such as scratches, rock chips, debris in the clear coat, misaligned body panels, sanding marks are much more noticeable and magnified after PPF is applied. What may look like a speck of dust between the paint and the PPF, is actually dirt nibs in the clear coat. I have seen Ferraris and Lamborghinis with hair, fingerprints and dirt, painted over it. However, the ideal PPF installation working area should be a clean, well lit environment with some sort of debris control and air filtration system. Most installers DO NOT have a clean room to where the film is installed. It's impossible to achieve perfect PPF installation, but installing PPF in your garage, a non-enclosed shop, and especially in a dealership, is the worst place to apply film. Working in a clean environment is the important part of installing PPF. In most cases, the condition of your vehicle also plays a huge part in a clean PPF installation. A swirl-free, scratch-free, rock-chip free, close to perfect finish is desirable. Even if your vehicle is brand new, it may have swirls, holograms, defects in the paint, minor scratches and other imperfections that needs to be removed. So the first step in PPF installation is Paint Correction or any type of defect removal.
Car Detailer Job Description Template We are looking for a thorough, responsible car detailer who will adhere to provide quality automotive cleaning services to our customers. The Car Detailer will clean vehicles according to company standards or client specifications, which may include performing detail inspections, thoroughly washing, buffing, and waxing exteriors, vacuuming, steaming, and deodorizing interiors, and keeping records related to gas levels and the condition of the vehicle. You should possess strong customer service skills and be familiar with the tools and agents used to clean and maintain vehicles.To be a successful car detailer, you should be committed to providing excellent service to customers. You should be courteous, responsible, and detail-oriented.Cleaning vehicle interiors and exteriors in compliance with all company standards and client requests.Operating buffers, steamers, hoses, vacuums, and other equipment to meet service expectations.Using cleaning, protective, and restorative agents to maintain and enhance the appearance of vehicles.
Is a Professional Detailing Worth The Money? Detailing may seem like a luxury treatment for your car, leaving many to ask themselves “is it worth it to get my car detailed?” The answer is yes, and we’re not just saying it cause we run a high-end mobile detailing service. Detailing your vehicle is absolutely worth it, and not just because it saves you from washing your own car. Regular detailing will have valuable benefits for your vehicle, from classic cars to daily drivers. Detailing your vehicle is practical and cost-effective, but it also has emotional value. We all know that a car’s value will start to depreciate as soon as you take it home. Unless, of course, you wait long enough for your family car to become a classic. Even then, you’ll need to maintain the condition of the car so that once it does become a classic, it’s still in mint condition. For the time being, though, let’s look at some of the more immediate benefits of getting your car detailed. When you pay the neighbors kid to wash your car, you get what you pay for, a cheap car wash. There will still be some crumbs left between the seats, and dirt behind the control panel. There will be no protective coat of wax, and no odor removal – unless you count hanging a new air freshener tree on the rearview mirror. They won’t detail the tires or run a clay bar over the exterior to gently remove any dirt and debris. That’s what you get when you pay for a detail. Detailing will make your car cleaner than you’ve ever seen it before. Besides getting all the dirt out of every pore and crevice, we will also add a protective coat of wax, and condition the interior to give it a longer life. A regular car wash won’t have the right products to get the Cheeto dust out of the seats, coffee out of the headliner, or road tar off of the exterior. You also don’t want a kid to tackle hard to remove stains. Without professional experience in stain removal, both interior and exterior stains, you can end up doing more damage than good. A non-professional may try to get too tough with exterior dirt, chipping the pain in the process. Removing stains from interior surfaces also require a gentle touch with the right products and techniques. Detailing your vehicle so that you get rid of all the stains will maintain the resale value of your vehicle, which makes the extra cost worth every penny.
Does PPF Damage New Car Paint? This type of material is completely safe to apply to your new car. In fact, most paint protection film customers opt to use this type of protective coating on the clear coat of vehicle’s paint vs a ceramic coating, traditional carnauba wax, or paint sealants due to its safe application. For those who are not aware, PPF is a thin, and uses a unique adhesive substance that bonds solidly to the substrate. During the installation process, the clear paint protection film undergoes a multiple-stage installation, where it is fitted, cut, placed, and then activated by a liquid spray. The installer will use a squeegee to help apply the film to the painted surface. This is when the adhesive goes to work to attach to the substrate. There are some vinyl materials or inferior quality protective films with cheap adhesives that will become quite sticky if water penetrates the top coat. In fact, this is more common than you’d think with vinyl wraps. But when it comes to a quality PPF like Ceramic Pro Kavaca Instant Healing Film, you’re 100% safe. Yes – a protective film for cars can be easily removed. However, once it is removed, the same film can’t be reinstalled on another vehicle or the same. This is a great example why PPF is best suited for people who are either leasing a vehicle (that are going to return it and want to ensure they don’t have exterior paint damage), or those planning on keeping the vehicle for extended periods.
Is it Worth it to Buy Paint Protection Film for Your Car? If you want to keep your car looking as new as possible, then you can wash it regularly and even get a ceramic coating done, but if you want to take it a step further, then you can get it wrapped with paint protection film. There’s a lot that goes into the procedure, not to mention the high cost and time you’ll have to spend waiting for your car to be done. But is getting your car wrapped paint protection film worth it? Paint protection film is arguably one of the best car care inventions since the chamois. Whether you just bought a brand new car or repainted your old one, there’s almost no better way to protect the car’s finish than paint protection film. But what makes it so great? According to Ceramic Pro, paint protection film is a polymer or polyurethane film that is placed over the car’s body panels in order to protect them from scratches, UV rays, rock chips, and other road debris. Have you ever seen, or heard of, a clear bra? Well, that’s basically “stage one” of a protection film procedure. Most shops that do it nowadays cover the whole front bumper the entire hood, side mirrors, and rear bumper. Basically, all of the body panels that are considered “high impact” areas that are vulnerable to most damage.
Advantages of using PPF Protection Film? By applying PPF Protective Film to your car, you can protect the bodywork, keeping the vehicle looking new and preserving its value over time. Being transparent and having a high gloss, the PPF film enhances the beauty of the bodywork, giving the vehicle a showroom appearance. We can also apply our PPF to cars with matte paint, without altering the colour. For maximum results, a nanotechnological bodywork treatment can be combined, which will further enhance the film's gloss, protective and hydrophobic qualities.The benefits of paint protection film range from cosmetic security to enhanced durability. PPF keeps your car looking newer for longer by defending it from damage caused by rocks, road debris, and winter sand and salt. It also shields the areas of your car most vulnerable to paint damage, including the hood, side-view mirrors, and fenders.We also protect your peace-of-mind. LLumar paint protection film is covered by a 5-year warranty* and is professionally installed at qualified dealers. The film's clear coat finish self-heals when scratched and is resistant to cracks, yellowing and staining. To ensure the perfect fit, each piece is custom cut to match your vehicle. LLumar paint protection film has the protection that’s a perfect fit.
What is a Nano Coating? A nano ceramic coating, a scientifically formulated solution meant to penetrate microscopic imperfections, fill those gaps in the top range of the nanoscale, and provide a layer of protection that’s nearly as strong as solid quartz. 9H ceramic coating work by bonding with the existing surface to form a protective nano-ceramic shield on the surface.Nano polymers bond with the surface and create an invisible shield with extreme hardness. It’s this hardness and protective coat that permits the car’s exterior to look great with minimal maintenance.This paint coating allows the sub surface to remain better protected and minimizes preventable damage from staining and damaging protected surfaces.Nano ceramic coatings are ideal in preventing and minimizing damage including chemical stains, UV damage and oxidation with easier cleaning requirements and an enhanced gloss.We’re about get technical – like to the sub-atomic level. Not Ant-Man going into Quantum Realm technical – but close. If you’re a visual learner, watch the video below, hosted by our buddy Adam Cote – as he explains how Ceramic Pro nano ceramic works.A nano ceramic coating, a scientifically formulated solution meant to penetrate microscopic imperfections, fill those gaps in the top range of the nanoscale, and provide a layer of protection that’s nearly as strong as solid quartz. 9H ceramic coating work by bonding with the existing surface to form a protective nano-ceramic shield on the surface.Nano polymers bond with the surface and create an invisible shield with extreme hardness. It’s this hardness and protective coat that permits the car’s exterior to look great with minimal maintenance.This paint coating allows the sub coated surface to remain better protected and minimizes preventable damage from staining and damaging protected surfaces. Nano ceramic coatings are ideal in preventing and minimizing damage including chemical stains, UV damage and oxidation with easier cleaning requirements and an enhanced gloss.
Pros & Cons of Teflon Coating on Cars Teflon Coating, which is also popularly known as Paint Protection Coating, is basically a treatment that is recommended by many dealerships and car detailing shops to ensure the longevity of the paint. Basically, these coatings form a protective layer over the paint along with giving it more gloss and shine. Teflon is a chemical form of synthetic fluoropolymer that is non-sticky in nature and reduces friction on which it is applied. It also enhances the paint’s ability to prevent corrosion or wear and tear in extreme temperature conditions. The most apparent advantage that applying of Teflon coating has is that the paint of your car will have a highly attractive shine as soon the process of applying it is completed.Also, unless the coating of Teflon isn’t applied properly, even the minor scratches in the paint will disappear.Teflon coating also acts as a paint protection film by forming a layer over the car’s paint that prevents minor scratches. While most new-age cars come with a high gloss paint finish, applying of a coat of Teflon should further make the car look pristine for longer.Finally, applying a coat of Teflon will even increase the life of the paint, provided the application is repeated every few months. First things first, there is nothing ‘bad’ about applying a coat of Teflon to your car. However, there are some negatives associated with the entire process through which many get the coating applied to their vehicles. It must be understood that Teflon is a registered Patent of Company DuPont and now part of Chemours India (Subsidiary set up of Dupont). However, it has been observed that many workshops take customers for a ride by merely waxing and machine polishing the vehicle in the name of applying a Teflon coating. Also, the polishes that such erratic car detailing shops use are not related to Teflon and hence, don’t have exactly the same benefits. Therefore, many times, it is seen that vehicles owners feel cheated as the inferior treatment used do not provide the benefits associated with Teflon coatings. The shine given by non-Teflon products is comparatively short-lived. Unfortunately, the unsuspecting customer never realizes that he has been short-changed and ends up failing to realize the benefits of Teflon coating.
What is Ceramic Coating? The term 'Ceramic Coating' is familiar to most car buyers today. Even before delivery, some take their new car for applying ceramic coating. Ceramic coating is a clear coat which includes a liquid polymer.When ceramic coating is applied on a car's body, the polymer forms a chemical bonding with the factory paint. Once coated, it can only be removed by abrasion and not by any chemicals. If done correctly, ceramic coating can even last the lifetime of the car. Ceramic coating offers good protection to the car's surface. The nano-coating can protect the car from most scratches, dirt and chemical contaminants. Ceramic coating also doesn't have any side-effects to the original paint. Ceramic coating also lasts longer than regular paint. Sincethe coating is infused with the stock paint due to strong chemical bonding, the protection stays put even under heavy shocks and vibrations.The long life of ceramic coating indirectly makes it highly cost-effective. In addition to all the above advantages, ceramic coating makes your car look so much better.
Pain Protection Film Paint Protection Film is one of the best ways to preserve the showroom quality finish on your vehicle. The virtually invisible film will keep your vehicle looking newer longer- without changing the design features or colour- by protecting vulnerable areas such as front bumpers, hoods, side mirrors, door handle cavities, door edges, rocker panels, and rear fender panels. Preserving the finish of your vehicle with 3M™ Paint Protection Film (PPF) keeps your vehicle looking newer longer, and can enhance the resale value of your vehicle in the future. 3M™ Paint Protection Film can be professionally installed anywhere you want to protect your vehicle finish from scratches, chips, stains and other damaging elements. The virtually invisible film will not alter the color or design elements of your vehicle. Image result for professional paint protection film description Paint protection film (PPF, also called clear bra, clear film or clear paint film) is a thermoplastic urethane often self healing film applied to painted surfaces of a new or used car in order to protect the paint from stone chips, bug splatters, and minor abrasions.